The DIY pallet desk table is practical and allows leg- and box-room. It is made with salvaged pallets arranged together to make the top surface. The legs and skirt are from regular wood. You can make it with pallet wood also.
The equipment needed:
- Pallets
- Crowbar
- Saw
- Sanding equipment
- Nails or screws
- Hammer or screwdriver
- And a desk plan (measurements)
The steps to make this table are as follows:
- Once you have your measurements decided, get your pallets and crowbar. Pry off the planks to make the worktop. These should be approximately the same size. Collect as many as you require.
- Now for the main part: create the main support frame. Get four thin pallet slats and nail or screw them to the leg posts. These will make side supports on both ends and two back supports for the back.
- For the top frame, make it slightly shorter than the top so you get a thin ledge on the edges. Nail the top frame together and attach it to the leg frame just made in step two. The base support is ready.
- Now for the making of the worktop: one by one, nail or screw the slats you collected to the top frame. Sand it down and run a duster all over it.
The industrial DIY pallet computer desk-table is ready to be whisked off into its designated spot. Add all your colorful craft work and material to customize it.
Related posts:
DIY Pallet Wood Flooring
Cafe Interior with Pallet Wood
DIY Big Sized Pallet Chalkboard Tutorial
Build Pallets Deck and Furniture
Outdoor Pallet Cooler Holder / Ice Chest
DIY Bedroom Wall Made of Pallets
Tutorial: Pallet Storage Box for Tools
DIY: Floors Made Out of Pallets
DIY Pallet Crib - Baby Cradle - Infant Bed!
DIY Wood Pallet Crate Storage & Decorations
DIY Wood Pallet Trash Bin
DIY Pallet Trough with Dividers